The Queensland Construction Productivity Code 2026 (the Code) (PDF, 671 KB) sets expectations for Queensland Government-funded construction projects to deliver value for taxpayers and safe, productive, lawful and respectful workplaces.
Importantly the Code complements the existing Queensland Procurement Policy 2026 (QPP).
The Code supports:
- better value for Queenslanders through productive, efficient projects delivered on time and within budget
- safe workplaces with strong work health and safety practices
- lawful and respectful workplace relations
- effective project, workforce and contract management
- freedom of association and lawful right of entry
- early resolution and reporting of workplace issues that may affect project delivery
- clear lines of accountability for client agencies and principal contractors.
When does the Code apply?
The Code applies to new Queensland state government-funded construction work released to the market (i.e., an expression of interest or request for tender) on and after 17 November 2026.
Existing contracts and procurement processes that commenced before that date will generally not be captured, although the Code provides a mechanism for it to be applied to an existing procurement or contract with approval from the Responsible Minister.
What does the Code apply to?
The Code applies to Queensland state government-funded construction work valued over $150 million where an expression of interest or request for tender is issued on and after 17 November 2026.
It applies to all parties participating in on-site activities.
Projects below the $150 million threshold can also be subject to code requirements with approval from the Responsible Minister.
What does the Code include?
The Code is divided into 12 parts as follows:
| Part | Title | Description |
| 1 | Statement on the Code | Establishes the Queensland Government’s expectations for lawful, safe, and productive workplaces in publicly funded construction projects, promoting value for money and consistent application across the sector |
| 2 | Commencement | Details when and how the Code applies to new government-funded construction procurements, including specific exclusions for prior and ongoing contracts |
| 3 | Application and scope | Defines which projects and participants the Code governs, sets a monetary threshold, exceptions, and clarifies relationships with other policies and legislation including the QPP and the Fair Work Act 2009 (Cth) |
| 4 | Responsibilities | Specifies the roles and responsibilities for parties covered by the Code including principal contractors and client agencies |
| 5 | Project and contract management | Outlines best practices for project planning and contract administration to drive effective collaboration, risk management, and timely project delivery |
| 6 | Workplace Relations Management Plan (WRMP) | Describes requirements for WRMPs in tender processes, including key matters to address such as labour sourcing, compliance, productivity, and risk |
| 7 | Workforce management framework | Sets out expectations for work health and safety, workers’ compensation, industrial relations compliance, and continuous improvement in workforce management |
| 8 | Freedom of association and right of entry | Ensures all parties have the right to join or not join industrial organisations without discrimination and that lawful right-of-entry processes are upheld |
| 9 | Dispute settlement, industrial action, strike pay and payments |
Establishes processes for resolving workplace disputes, managing industrial action, and managing payments during unlawful industrial conduct |
| 10 | Compliance and assurance | Explains how compliance with the Code is monitored, assessed, reported, and what actions are triggered in the event of non-compliance |
| 11 | Exemptions and Practice Directions | Provides procedures for seeking exemptions from the Code and guidelines for issuing Practice Directions on the Code’s interpretation or application |
| 12 | Glossary | Defines key terms and concepts used throughout the Code to ensure clarity and consistent interpretation |
Workplace Relations Management Plans
For projects covered by the Code, the successful contractor must prepare a Workplace Relations Management Plan (WRMP) before the contract is awarded. The plan sets out how labour sourcing, productivity, safety and workplace relations matters will be managed to support safe, efficient project delivery.
A model WRMP will be released shortly.
Compliance with the Code
Compliance is an ongoing condition of participating in Queensland Government construction work covered by the Code.
Parties must cooperate with compliance monitoring and demonstrate that they are meeting relevant Code requirements throughout the project lifecycle. Compliance monitoring includes audits, site inspections and investigations, and processes for addressing suspected breaches and possible sanctions.
Does the Code apply to privately funded work?
No. The Code does not apply to construction work that is privately funded.
Does the Code apply to all businesses working on a covered project?
Yes. It applies to parties participating in on-site activities, to the extent the relevant requirements relate to their role, work, contractual influence and practical control.
Does the Code apply to existing projects or contracts?
Generally, no. It does not apply to procurements released to the market, contracts entered into or specified procurement or commercial commitments made before commencement.
It also excludes variations, extensions, options and additional packages forming part of a pre-commencement contract or commitment, and certain rolling programs of work focused on upgrades or maintenance programs.
The relevant Minister for a client agency may seek written approval from the Responsible Minister to apply the Code to an existing procurement process or contract.
Does the Code apply to work performed by government delivery entities?
No. It does not apply where a Queensland Government department, agency, or government-owned or government-operated delivery entity uses its own workforce, including RoadTek and QBuild.
It also does not apply to local councils engaged to undertake work on behalf of the Queensland Government.
What do “must”, “should” and “may” mean?
Must identifies a mandatory requirement.
Should identifies best practice that parties are encouraged to apply where practical.
May indicates that a party has flexibility or authority to take the stated action.
Relationship with other requirements
How does the Code interact with the Queensland Procurement Policy and Supplier Code of Conduct?
The Code complements the Queensland Procurement Policy 2026 and the Queensland Government Supplier Code of Conduct 2026. It does not displace their requirements. If there is an inconsistency or conflict, the Queensland Procurement Policy and Supplier Code of Conduct prevail.
How does the Code interact with the Commonwealth’s Fair Work Act 2009?
The Code does not displace or alter obligations under the Fair Work Act 2009 (Cth) and is not intended to require or encourage conduct that would contravene that Act.
If a party considers compliance would cause a conflict, it must notify the Department of State Development, Infrastructure and Planning within 48 hours, explain the circumstances and provide any further information reasonably requested.
How does the Code interact with the Prequalification (PQC) System?
The Code may require parties to submit information that they may have already submitted under the PQC system.
In that case, existing prequalification information already held by the Queensland Government may be incorporated by reference rather than resubmitted. This reduces the administrative burden on parties from supplying information already held by the government.
Roles and responsibilities
What are the main responsibilities of a principal contractor?
Principal contractors delivering publicly funded construction projects must comply with the Code.
Principal contractors must take all reasonable steps, within the scope of their contractual influence and practical control, to ensure subcontractors performing work on the project site comply with the Code.
In practice this means principal contractors must build Code requirements into their contracts and systems, prepare and follow their Workplace Relations Management Plan, use reasonable efforts to manage subcontractor compliance, maintain lawful workplace practices, report specified matters promptly, respond to industrial action, and cooperate with monitoring, audits and investigations.
They must provide a contractual commitment they will comply with the Code and permit access by authorised personnel of the Department of State Development, Infrastructure and Planning for monitoring and compliance purposes.
What are the main responsibilities of subcontractors?
Subcontractors must comply with the Code and applicable laws to the extent relevant to their work and control.
They must maintain work health and safety (WHS) and lawful workplace practices, follow right-of-entry requirements, and report suspected breaches.
What are the main responsibilities of a client agency?
Client agencies play a key role in the procurement process and must embed the Code requirements in their internal procurement and contract-management processes.
They must also ensure contracts require compliance with the Code and monitor compliance using all reasonable efforts.
Agencies must refer relevant notifications to the Department of State Development, Infrastructure and Planning, act on confirmed breaches within their contractual powers, and manage exemption requests through appropriate governance processes.
What is expected of all parties?
All relevant parties onsite must comply with applicable laws, industrial instruments, court and tribunal decisions, protect confidentiality, promote Code compliance, report suspected non-compliance, communicate honestly and support cooperative project and contract management.
Who administers the Code?
The Minister for Industrial Relations has overall responsibility under the draft and must report to Cabinet on Code performance at least annually.
The Department of State Development, Infrastructure and Planning is assigned operational responsibility for monitoring, investigations, assurance and reporting.
Tendering and Workplace Relations Management Plans
Is a full Workplace Relations Management Plan required with an expression of interest or initial tender?
Not usually. At the expression-of-interest or initial tender stage, the tenderer must provide a written commitment that it understands the WRMP requirements, will comply with the Code and will prepare a compliant WRMP if shortlisted or invited to the next stage.
When must the full WRMP be provided?
If there is a later procurement stage, the WRMP is required at that stage when requested.
If there is no shortlisting or subsequent tender stage, the successful tenderer must submit a compliant WRMP before the contract is awarded or entered into.
The client agency must be satisfied that the WRMP complies before awarding the contract.
What must a WRMP address?
The WRMP must cover labour sourcing, workplace compliance arrangements, subcontractor management, productive workforce practices, plant and equipment utilisation, workforce consultation, labour hire, site access, statutory workplace rights, performance and conduct management, industrial-relations risks, dispute resolution, industrial action, project delivery, productivity, cost control, past performance and measures supporting the recruitment and retention of women.
Does an industrial instrument automatically make a tenderer non-compliant?
No. The existence of a provision in an industrial instrument approved under the Fair Work Act 2009 is not itself a ground for exclusion from the process.
However, the tenderer must identify specified provisions in its WRMP and explain how impacts on cost, productivity and timely delivery will be managed.
What contractual provisions are required?
Relevant procurement and contract documents must include an enforceable warranty to comply with the Code and legal consent allowing the Department of State Development, Infrastructure and Planning and other authorised Queensland Government personnel to inspect work, materials and facilities, inspect and copy relevant records, and interview people where necessary to demonstrate compliance.
Model contract clauses will be released shortly.
Workplace practices, safety and industrial relations
Does the Code change existing work health and safety (WHS) duties?
No. Duty holders must continue to meet their obligations under the Work Health and Safety Act 2011 and Work Health and Safety Regulation 2011.
The Code adds procurement and assurance expectations, including the requirement to have detailed policies and practices in place to demonstrate risk management processes, WHS resources for the project, emergency and incident response, reporting and investigation of incidents, consultation and issues resolution, record keeping and related measures.
What does the Code say about freedom of association?
Workers and employers must be free to join or not join an industrial organisation and must not be discriminated against or victimised because of membership or non-membership.
What are the right of entry expectations?
The Code requires strict compliance with statutory right of entry processes.
Project arrangements must not relax or circumvent those requirements or provide unauthorised access to employee or employer records.
How should workplace disputes be managed?
Parties must make every effort to resolve disputes at the enterprise or workplace level using the procedure in the applicable award, registered agreement or workplace arrangement.
Dispute processes should include graduated escalation and reasonable timeframes. Where the relevant procedure is being followed, parties are encouraged to maintain work as usual, subject to applicable laws (such as WHS requirements).
The Code does not displace the dispute resolution procedure contained in a party’s own industrial instrument that has been approved by the Fair Work Commission.
What does the Code require in relation to industrial action?
Contractors must take all reasonably available steps to prevent, manage or end unprotected industrial action affecting project delivery, including pursuing available legal remedies where reasonable.
Employees must not be paid for time spent in industrial action unless payment is legally required or properly authorised.
Can contractors make payments to unions or union representatives?
No. Contractors and their representatives must not make payments, commissions, gratuities or similar payments, directly or indirectly, to a union delegate, official, representative or agent, or to a union-controlled account or fund.
Reporting, compliance and consequences
What matters must be reported to the Department of State Development, Infrastructure and Planning within 24 hours?
Contractors are required to report the following matters within 24 hours of becoming aware of:
- Suspected Code breaches.
- Threatened, possible, probable, impending or actual unlawful industrial conduct.
- Industrial relations or WHS grievances or disputes that may affect costs, contracts, delivery or timelines, industrial action and associated lost time.
- Industrial action that could affect project delivery.
- Requests by any industrial organisation or their representative for payment of any kind in relation to a threatened, impending, possible, probable or actual industrial dispute.
How will compliance be monitored?
Monitoring may include desktop reviews, audits, site inspections, examination and copying of relevant documents, interviews, investigation of suspected breaches and post-contract reviews.
Parties must cooperate with reasonable access and information requests authorised under the Code and their contracts.
What happens if a breach is suspected?
The Department of State Development, Infrastructure and Planning may investigate, provide feedback to the principal contractor and client agency, and coordinate with Procurement Assurance Branch.
If the suspected conduct may breach a law, it may be referred to the agency responsible for administering that law.
What consequences may follow a confirmed breach?
Any compliance action will align, as far as reasonably practicable, with the Queensland Procurement Policy Procurement Assurance Model, including procedural fairness, possible sanctions and appeals.
Exemptions and Practice Directions
Can an exemption be sought?
Yes. A client agency or affected party may seek exemption from one or more requirements in exceptional circumstances where the exemption is in the public interest.
Relevant grounds include impracticability, material effects on competition or capacity, adverse value-for-money or delivery impacts, conflict with an existing obligation, duplication of equivalent assurance, or barriers for small business.
How is an exemption requested?
The request must be in writing and approved by the client agency Chief Executive before submission to the Responsible Minister.
The Responsible Minister decides whether to approve, conditionally approve or decline the request after considering the agency request and advice from the Department of State Development, Infrastructure and Planning.
What is a Practice Direction?
A Practice Direction may provide guidance on the interpretation, administration or application of the Code.
It cannot alter or suspend an award or enterprise agreement, require conduct inconsistent with law, or retrospectively establish non-compliance.
It must state its purpose, scope, commencement, duration and relationship with the Code and existing instruments.
Practical next steps
What should client agencies do before commencement?
Client agencies should identify upcoming planned procurement processes, update procurement and contract templates, establish internal reporting and escalation procedures, nominate accountable officers, prepare an exemption governance process, and ensure project and commercial teams understand the WRMP and assurance requirements.
What should tenderers and contractors do before bidding?
Any party intending to tender for government-funded construction work should review their industrial instruments and workplace arrangements, map contractual and subcontractor controls, prepare evidence of WHS and delivery performance, develop a WRMP approach, establish 24-hour reporting pathways, and confirm they can provide the required warranties and access permissions.
Where can parties obtain further information?
Further information is available at:
Phone: 1300 975 040
Email: contact@constructionproductivity.qld.gov.au